Commercial Telematics Hardware Engineered for Tough Road Realities
Software is only as dependable as the hardware surviving on the road. ADL Moto's commercial devices are built with 9-90V automotive surge protection, IP67 waterproof enclosures, dual AI neural processors, and tamper-resistant wiring to deliver flawless telemetry across Bangladesh.
Built to Survive the Harsh Realities of Commercial Transport
Consumer GPS dongles and plastic gadgets burn out when subjected to commercial vehicle alternators, dusty highways, and tropical monsoon downpours. ADL hardware is engineered to automotive OEM benchmarks.
Surge Protection
Withstands voltage spikes up to 90V caused by faulty starter dynamos, dual battery jumper cables, and intermittent alternator loads.
Thermal Resilience
Industrial operating temperature envelope from -20°C to +70°C, preventing processor throttling inside closed vehicle cabins under summer sun.
Ingress Sealed
Ultrasonic sealed polycarbonate casing and rubberized gland grommets protect circuit boards against deep water crossings and red mud spray.
Backup Power
Internal rechargeable backup batteries keep devices transmitting emergency power cut alarms and live location even if vehicle battery cables are severed.
Seven Commercial Hardware Categories
Explore dedicated device families designed for light delivery vans, interdistrict coaches, heavy mining dumpers, and refrigerated cargo trailers.
4G Hardwired Enterprise Vehicle Trackers (4-Wire to 10-Wire)
The backbone of fleet telematics. Hardwired directly behind the vehicle dashboard with covert wiring harnesses. Includes ACC ignition sensing, remote starter immobilization relay output, external SOS emergency push button, and RS485 communication ports for fuel probes.
Dual-Lens AI Video Telematics Dashcams (ADAS & DMS)
Integrated windshield-mounted dual camera with embedded AI neural processing unit. The road-facing camera (ADAS) detects forward collisions and tailgating, while the infrared cabin camera (DMS) monitors driver drowsiness, yawning, eye closure, and phone usage with real-time Bengali/English voice coaching.
Digital Capacitive Fuel Level Immersion Probes
Cut-to-fit stainless steel capacitive sensor rods immersed vertically into commercial diesel tanks. Connects directly to the telematics TCU via RS485 Modbus, transmitting exact millimeter fuel levels with mathematical vibration slosh filtering and gas station pump audit precision.
Industrial Mobile DVR (MDVR) Systems (4CH & 8CH)
Heavy-duty metallic recording units designed for passenger transit coaches, ready-mix concrete trucks, and cash vans. Features lockable 2TB SSD storage, rugged aviation screw terminals, blind-spot detection (BSD) cameras, and real-time live video streaming to the central command center.
Plug-and-Play OBD-II Telematics Dongles
Zero-wiring installation for corporate car pools, leased executive vehicles, and light commercial vans. Plugs in under 10 seconds into the vehicle's standard 16-pin diagnostic port, reading live engine RPM, coolant temperature, trouble codes (DTC), and trip mileage without affecting warranty.
Electronic GPS Padlocks & Magnetic Asset Trackers
Self-powered tracking devices for shipping containers, intermodal chassis, and remote machinery without an engine battery. Features heavy-duty Neodymium industrial magnets, IP67 waterproof construction, electronic steel cable seal cut alarms, and ultra-long 10,000mAh battery life.
Bluetooth BLE 5.0 Sensors & Driver Authentication
Expandable peripheral sensors that communicate wirelessly with the primary telematics hub. Includes reefer temperature/humidity probes (-30°C to +70°C), driver RFID / iButton fobs, door magnetic open/close sensors, and wireless Bluetooth axle load transducers.
Non-Invasive Certified Installation Architecture
How ADL hardware connects into commercial vehicles while preserving OEM warranty and electrical system integrity.
Power & ACC Line
Connected using automotive inline fuse taps directly to constant battery power (12V/24V), chassis ground, and ignition ACC detection without splicing OEM factory wires.
Safety Immobilizer Relay
A sealed 40A solid-state relay interfaces with the starter motor or fuel pump circuit, programmed with intelligent speed decay locks to ensure engine cut only triggers safely.
Sensor RS485 Harness
Heavy-duty corrugated PVC conduit protects RS485 sensor cables routed beneath the chassis to fuel tanks, reefer temperature probes, and cargo door magnetic contacts.
Hardware Family Comparison Matrix
| Device Series | Power Input | Internal Backup | I/O & Interfaces | Ideal Fleet Use Case |
|---|---|---|---|---|
| 4G Wired GPS (T400) | 9V – 90V DC | 500mAh Li-ion | ACC, Relay, SOS, RS485 | Commercial Trucks & Vans |
| AI Dual Dashcam | 9V – 36V DC | Supercapacitor | Dual 1080P, NPU, SOS, 4G | Passenger Buses & Cargo |
| Capacitive Fuel Probe | Powered via TCU | N/A (Immersion) | RS485 Modbus / Analog | Long-Haul Diesel Fuel Tanks |
| Rugged MDVR (4/8CH) | 9V – 36V DC | UPS Circuit / Delay | 8x AHD, 2TB SSD, RS232 | Transit Buses & Heavy Plant |
| OBD-II Dongle | 12V / 24V OBD Port | 150mAh Battery | CAN Bus / K-Line / Bluetooth | Corporate Car Pool & SUVs |
| Smart E-Padlock | Internal Rechargeable | 10,000mAh Li-ion | Steel Cable, RFID, BLE, 4G | Shipping Containers & ICD |
Hardware Support & Technical Questions
Equip Your Commercial Fleet with Rugged Hardware
Request a physical hardware demonstration, trial samples, or custom sensor integration tailored for your vehicle makes and models.